Common Yealink Menu Navigations

Common Yealink Menu Navigations

Commonly Used Menu Options

Edit DSS Keys (BLF's Speed Dials)

  1. Press Menu.
  2. Select Features.
  3. Select DSS Keys.

Alternate method:

  • Hold the line key you would like to change for 5 sec.
    This will open a menu that will allow you to create BLFs and Speed Dials.

Depending on your system setup, these buttons might be overridden by account defaults.

Fix Voicemail Destination

  1. Press Menu
  2. Press Messages
  3. Press Voicemail
  4. Press Set Voice Mail Code
  5. Change the voicemail code to 5001 (For Primecall) or 'voicemail' for Enswitch

 

Switch from General Voicemail to Unified Voicemail

  1. Press Menu
  2. Press Message
  3. Press Voicemail
  4. Press view Voicemail
  5. Then select user 500

When switching to Unified Voicemail, please ensure the unified voicemailbox has been implemented already by giving the support department a call at 844.59PRIME (844.597-7463) or by emailing a ticket to support@primecall.com.

Network Settings Adjustments

Enable DHCP

  1. Press Menu
  2. Select Settings
  3. Select Advanced Settings:
    • You will be asked for a password
    • Push the button underneath the "abc" text on the screen until it becomes "123"
    • Password: 50615061
  4. Select network
  5. Select WAN port
  6. Select option 2 (IPV4)
  7. Use the arrow keys to change the type from static to DHCP
  8. Press save

 

Add Static IP

  1. Press Menu
  2. Select Settings
  3. Select Advanced Settings:
    • You will be asked for a password
    • Push the button underneath the "abc" text on the screen until it becomes "123"
    • Password: 50615061
  4. Select network
  5. Select WAN port
  6. Select option 2 (IPV4)
  7. Use the arrow keys to change the type from DHCP to Static
  8. Add the static IP information for the phone and network
  9. (Remember to add the DNS servers as well. If unsure try using (8.8.8.8) and (1.1.1.1))

 

Remove a VLAN

  1. Press Menu
  2. Select Settings
  3. Select Advanced Settings
    • You will be asked for a password
    • Push the button underneath the "abc" text on the screen until it becomes "123"
    • Password: 50615061
  4. Select network
  5. Select VLAN
  6. Use the arrow keys to change the VLAN status to disabled
  7. Press save

    • Related Articles

    • Common Yealink Menu Navigations

      Commonly Used Menu Options Edit DSS Keys (BLF's Speed Dials) Press Menu. Select Features. Select DSS Keys. Alternate method: Hold the line key you would like to change for 5 sec. This will open a menu that will allow you to create BLFs and Speed ...

    • Common Yealink Menu Navigations

      Commonly Used Menu Options Edit DSS Keys (BLF's Speed Dials) Press Menu. Select Features. Select DSS Keys. Alternate method: Hold the line key you would like to change for 5 sec. This will open a menu that will allow you to create BLFs and Speed ...

    • Yealink W56H User Guide

      Handset Components Button Name Function 1 Receiver Receives audio in receiver mode. 2 Power Indicator LED Indicates call status, message status and charging status. 3 LCD Screen Shows information. 4 Soft Keys Depending on the status of the phone, the ...

    • Yealink W56H User Guide

      Handset Components Button Name Function 1 Receiver Receives audio in receiver mode. 2 Power Indicator LED Indicates call status, message status and charging status. 3 LCD Screen Shows information. 4 Soft Keys Depending on the status of the phone, the ...

    • Basic Features for Yealink Phones

      Features for Calls Placing a Call Method 1 Pick up the handset or press the Speaker key. Dial the number or press the line key associated with the speed dial of the number you would like to call. Press the Send key. Alternatively, press the # key. ...